Area Table
Process:
Select one OSPF Process to display its area list.
Select:
Select the desired item for configuration. It is multi-optional.
Area ID:
Displays the configured area.
Area Type:
Displays the type of the area and it can be modified.
Summary:
Displays the Summary parameter and it can be modified.
Redistribution:
Displays the Redistribution parameter and it can be
modified.
Default Cost:
Displays the stub cost of the area and it can be modified.
Default Route
Advertise:
Displays the Default Route Advertise status and it can be
modified.
Metric Type:
Displays the type of default route and it can be modified.
Metric:
Displays the metric of default route and it can be modified.
SPF runs:
Displays the number of times that the intra-area route table
has been calculated using this area's link-state database.
This is typically done using Dijkstra's algorithm.
ABR Count:
Displays the total number of area border routers reachable
within this area. This is initially zero, and is calculated in each
SPF Pass.
Area LSA Count:
Displays the total number of link-state advertisements in this
area's link-state database, excluding AS-External LSAs.
Area LSA
Checksum:
Displays the 32-bit unsigned sum of the link-state
advertisements' LS checksums contained in this area's
link-state database. This sum excludes external (LS type 5)
link-state advertisements. The sum can be used to
determine if there has been a change in a router's link state
database, and to compare the link-state databases of two
routers.
230
