Global Address Table
Select:
Select the desired entry to delete or modify the
corresponding global address.
Global Address:
Modify the global address.
Prefix Length:
Modify the prefix length of the global address.
Type
：
Displays the configuration mode of the global address.
Manual: Indicates that the corresponding address is
configured manually.
Auto: Indicates that the corresponding address is
created automatically using the RA message or obtained
from the DHCPv6 Server.
Preferred Lifetime
：
Displays the preferred time of the global address.
Valid Lifetime
：
Displays the valid time of the global address.
Status
：
Displays the status of the global address.
Normal: Indicates that the global address is normal.
Try: Indicates that the global address may be newly
configured.
Repeat: Indicates that the corresponding address is
duplicate. It is illegal to access the switch using this
address.
4.1.6
Management Port IPv4
The Management Port is a dedicated Ethernet port for out-of-band management of the device.
Traffic on this port is segregated from operational network traffic on the switch ports and
cannot be switched or routed to the operational network. Use this page to configure network
information on the management port.
Choose the menu
System
→
System Info
→ Management Port IPv4
to load the following page.
Figure 4-8 Management Port IPv4
22
