Routed Port:
Enter the routed port the desired entry must carry.
Interface State
Interface:
The interface for which data is to be displayed or configured.
Operational Status:
The operational state of IGMP on the selected interface.
Querier State:
Indicates whether the selected interface is in querier or
non-querier mode.
IP Address:
The IP address of the selected interface.
Querier IP:
The address of the IGMP querier on the IP subnet to which
the selected interface is attached.
Querier Up Time:
Indicates whether the selected interface is in querier or
non-querier mode.
Querier Expiry
Time:
The time in seconds remaining before the other querier
present timer expires. If the local system is the querier, this
will be zero.
Wrong Version
Queries Received:
The current number of dynamic groups for the selected
interface.
Number of Joins
Received:
The number of times a group membership has been added
on the selected interface; that is, the number of times an
entry for this interface has been added to the cache table.
This gives an indication of the amount of IGMP activity on
the interface.
Number of Groups:
The current number of entries for the selected interface in
the cache table.
11.2.4
Multicast Group Table
On this page you can view the information of the multicast groups already on the switch.
Multicast IP addresses range from 224.0.0.1 to 239.255.255.255. The range for receivers to
join is from 224.0.1.0 to 239.255.255.255.
Choose the menu
Multicast
Routing→IGMP→Multicast Group Table
to load the following
page.
Figure 11-8 Multicast Group Table
264
