Figure 12-7 Port Priority Config
Configuration Procedure:
Select the desired port or LAG to set its priority. Click
Apply
.
Entry Description:
UNIT:1/LAGS:
Click
1
to configure the physical ports. Click
LAGS
to configure
the link aggregation groups.
Select:
Select the desired port to configure its priority. It is
multi-optional.
Port:
Displays the physical port number of the switch.
Priority:
Specify the CoS queue that the port will be mapped to.
The packets are firstly mapped to CoS queues, then to TC
queues according to the
802.1P/CoS to Queue Mapping
relations.
LAG:
Displays the aggregation group which the port is in.
Note:
1)
All the ports in the same LAG should be assigned with the same port priority.
2)
To complete QoS function configuration, you have to go to the
Schedule Mode
page to
select a schedule mode after the configuration is finished on this page.
300
