Next BSR message
time:
Displays the time of next BSR message sending if this is the
elected BSR.
Expire:
Displays the expiry time of the elected BSR.
PIM SM Candidate BSR Information
Candidate BSR
Address:
Displays the Candidate BSR address.
Priority:
Displays the priority of the Candidate BSR.
Hash Mask Length:
Displays the hash mask length of the Candidate BSR.
11.4.4
RP
In the PIM SM mode, RP receives multicast data from the source and transmits the data down
the shared tree to the multicast group members. You must have an RP if the interface is in
sparse-dense mode, and you can manually assign static RP or config candidate RP to generate
the RP.
Choose the menu
Multicast Routing→PIM SM→RP
to load the following page.
Figure 11-21 RP Config
The following entries are displayed on this screen:
284
