The following entries are displayed on this screen:
MVR Config
MVR:
Before configuring functions related to MVR, click Enable to
enable MVR function globally.
MVR Mode:
Select the MVR mode.
Compatible
: The switch working in Compatible mode does not
learn multicast groups, which means the MVR switch does not
forward IGMP reports from the hosts to the IGMP router. So the
IGMP router has to be statically configured to transmit all the
required multicast streams to the MVR switch.
Dynamic
: The MVR switch learns existing multicast groups by
snooping the IGMP queries from the IGMP router and forwarding
the IGMP reports from the hosts to the IGMP router on the
Multicast VLAN.
Multicast VLAN:
Specify the VLAN on which the multicast data will be received.
Query Response
Time:
Set the maximum time wait for the IGMP membership report on
a receiver port. When an IGMP query is sent from a receiver
port, the switch waits for the default or configured MVR
response time for an IGMP group membership report before
removing the port from the multicast group. The value ranges
from 1 to 100 tenths of seconds.
Max Multicast
Groups:
Displays the max number of multicast groups that MVR
supports.
Current Multicast
Groups:
Displays the current number of the MVR groups.
9.3.2
Port Config
Use this page to configure MVR settings on specific ports. To configure the settings for one or
more ports, select each entry to modify and click
Edit
. The same MVR settings are applied to all
selected ports.
152
