Police Two Rate:
Select this option to enable the two-rate traffic policing style for
the policy-class. The two-rate form of the police attribute uses
two data rates and two burst sizes. Only the smaller of the two
data rates is intended to be guaranteed.
Redirect Interface:
Select this option to force a classified traffic stream to the
specified egress port (physical port or LAG). Use the Interface
field to select the interface to which traffic is redirected.
Note:
To complete QoS function configuration, you have to go to the
Schedule Mode
page to select
a schedule mode after the configuration is finished on this page.
12.2.6
Service Config
Choose the menu
QoS
→
DiffServ
→
Service Config
to load the following page.
Figure 12-16 DSCP Priority
Configuration Procedure:
Add DiffServ policies to interfaces or remove policies from interfaces.
Entry Description
:
DiffServ Service Config
Policy:
Select a policy.
Type:
Displays the traffic flow direction to which the policy is applied.
Interface:
Select one or more interfaces bound to the policy.
DiffServ Service Table
Interface:
Displays the interfaces that have an associated policy.
Type:
Displays the traffic flow direction to which the policy is applied.
313
