Transit Area ID:
Displays the transit area ID of the virtual link.
Neighbor Router ID:
Displays the neighbor router ID of the virtual link.
Retransmit Interval:
The retransmit interval for the specified interface. This is the
number of seconds between link-state advertisements for
adjacencies belonging to this router interface. This value is
also used when retransmitting database descriptions and
link-state request packets. The valid value ranges from 1 to
65535 seconds and the default is 5 seconds.
Hello Interval:
The hello interval for the specified interface in seconds. This
parameter must be the same for all routers attached to a
network. The valid value ranges from 1 to 65535 seconds
and the default is 10 seconds.
Dead Interval:
The dead interval for the specified interface in seconds. This
specifies how long a router will wait to see a neighbor
router's Hello packets before declaring that the router is
down. This parameter must be the same for all routers
attached to a network. The valid value ranges from 1 to
65535 seconds and the default is 40.
Transmit Delay:
The Transit Delay for the specified interface. This specifies
the estimated number of seconds it takes to transmit a link
state update packet over the selected interface. The valid
value ranges from 1 to 65535 seconds and the default is 1
second.
Authentication
Type:
You may select an authentication type other than none by
clicking on the 'Authentication Type' button. The choices
are:
null
: No authentication.
simple
: Use simple password.
md5
: Use md5 message-digest algorithm.
Simple Key:
Displays the active simple password of the interface.
MD5 Key ID:
Displays the active MD5 key ID of the interface.
MD5 Key:
Displays the active MD5 key of the interface.
233
