SVS1
Vision sensor
Quick guide
DESCRIPTION
The SVS1 series of vision sensors offers the easiest way to solve the most
common machine vision applications.
-
No PC needed
-
3.5’’ LCD colour display configurator
-
640x480 image sensor
-
Compact IP54 housing
-
Red light LED illuminator
-
Selectable lens
-
Focus knob
-
Standard M12 connectors
ELECTRICAL CONNECTIONS
M12 8 poles
(VSC connection)
pin 1: ethernet TX+
pin 2: ethernet RX+
pin 3: ethernet RX-
pin 4: Not used
pin 5: 24 Vdc
pin 6: Not used
pin 7: ethernet TX-
pin 8: GROUND
M12 8 poles
(power and I/O)
pin 1: white : digital input 1
pin 2: brown : 24 Vdc
pin 3: green : STROBE for ext. illuminator
pin 4: yellow : output 1
pin 5: grey : output 2
pin 6: pink : output 3
pin 7: blue : GROUND
pin 8: red : external trigger
HARDWARE CONNECTIONS
M12 8 Poles (Power and I/O)
Power:
Voltage:
+24 VDC (22-26 VDC)
Current:
300 mA max
Part Detect Signal Input:
Trigger ON:
> 20 VDC
Trigger OFF:
< 2 VDC
Output 1:
Output 2:
Output 3:
Inspection Selection:
Signal ON:
> 20 VDC
Signal OFF:
< 2 VDC
External Illuminator Trigger:
Signal ON:
5 VDC
Signal OFF:
0 VDC
SVS1 MOUNTING
The SVS1 sensor can be installed in many different ways.
A set of fixing accessories and brackets is available in the Datasensor
catalogue. For example:
Mounting Kit
U-shaped fixing bracket
VSC MOUNTING
All the accessories for VSC mounting are included in the package. The VSC
unit can be installed on a DIN rail or on a panel.
DIN RAIL MOUNTING
Wedge the VSC unit in the DIN rail. First set the upper part of the monitor
and then press down the lower part.
When the VSC unit has been properly positioned on the DIN rail, fix it using
the two white lock wings.
PANEL MOUNTING
First, place the rubber seal around the VSC unit.
Then fix the monitor on the panel using the two lock screws and the two
black caps.
INDICATORS
From left to right
1. Power,
green;
2.
Digital output 2, yellow;
3.
Digital output 1, yellow;
4.
VSC connection status, green.
1.
Setting mode, green;
2.
Adjust mode, green;
3.
Monitor mode, green;
4.
Main menu, green;
5. Power,
green;
6.
Digital output 1, yellow;
7.
Digital output 2, yellow;
8.
Sensor connection status, green.
OPERATING DISTANCE PANEL
Field of View (mm)
Operating distance(mm)
SVS1-12-DC-X
SVS1-08-DC-X
SVS1-06-DC-X
50
17 x 12
25 x 20
42 x 30
80
25 x 20
40 x 30
60 x 41
110
33 x 25
55 x 40
80 x 55
140
45 x 35
70 x 50
98 x 69
170
53 x 38
85 x 60
118 x 83
200
60 x 50
100 x 70
138 x 92
300
90 x 65
145 x 103
201 x 140
400
121 x 82
186 x 132
265 x 189
500
150 x 110
236 x 167
330 x 232
600
185 x 130
282 x 232
385 x 270
TECHNICAL DATA
Supply voltage:
24 VDC ± 10%
Ripple voltage:
1 Vpp max with illuminator
2 Vpp max without illuminator
Consumption (SVS1 + VSC):
(excluding output current and
illuminator)
210 mA @ 24 VDC
Consumption with illuminator:
(depends on how long
illuminator stays on)
300 mA @ 24 VDC
Outputs:
3 PNP outputs
(short circuit protection)
VSC connection:
M12 8-poles A-code
Interface for external
illuminator:
Strobe signal (TTL)
Output current:
100 mA max
Output saturation voltage:
< 2 V
Optics: Integrated
Resolution:
640 × 480 (VGA)
Dimensions:
69.8 × 51.5 × 40 mm (sensor)
96 x 96 x 39 mm (configurator)
Indicators:
4+8 LED + 3.5’’ LCD colour display
Setup: VSC
configurator
Data retention:
Non-volatile FLASH memory
Operating temperature:
-10 °C … +55 °C
Storage temperature:
-25 °C … +70 °C
Vibration:
0.5 mm amplitude, 10 … 55 Hz frequency,
for every axis (EN60068-2-6)
Shock resistance:
11 ms (30 G) 6 shocks for every axis
(EN60068-2-27)
Housing material:
Aluminium alloy / ABS
Mechanical protection:
IP50 (SVS1) / IP40 (VSC)
Connections:
2 x M12 8-poles A-code
Weight:
125 g (SVS1) / 170 g (VSC)
SVS-CV-VSC-xx
CS-A1-06-B-xx
Red
Yellow
24 VDC
-
+
-Blue
Grey
Pink
White
Green
-Blue
-Blue
-Blue
-Blue
-Blue
-Blue
+Brown
Locking clips
DIN Rail groove
Rubber seal
Locking
screws
Cap
24 VDC
-
+
24 VDC
-
+
