manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 93 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 93

91

3

2. Enlargement and Reduction Copying

You can enlarge or reduce the size of copies by means of the following procedures.
•

Specifying the copy paper size in advance so that the equipment will detect the original size and auto-
matically select the most appropriate reproduction ratio for the copy paper size (= automatic magnifica-
tion selection)

•

Specifying both original size and copy paper size separately

•

Using the zoom buttons or the one-touch zoom buttons

The enlargement/reduction ratio available differs depending on whether the originals have been set on the 
original glass or on the Reversing Automatic Document Feeder (optional).

On the original glass: 25 to 400%
On the Reversing Automatic Document Feeder: 25 to 200%

Automatic Magnification Selection (AMS)

•

The automatic magnification selection cannot be selected for the following originals. Set their repro-
duction ratios in other ways. 
-

Highly transparent originals (e.g. OHP film, tracing paper)

-

Wholly dark originals or originals with dark borders

-

Non-standard size originals (e.g. newspapers, magazines)

•

For the original sizes available for this automatic magnification selection, see 

 

 P.58 “Acceptable orig-

inals”.

1

Place paper in the drawer(s).

2

Press the Enlargement/Reduction ([ZOOM...]) button.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments