manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 70 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 70

68

2.HOW TO MAKE COPIES

2.Making Copies (Cont.)

2

5

Place the next original, and press the [START] button.

• Data scanning of this original starts.
• The next original will also be scanned in the same manner when you press the [YES] button on the touch panel 

and then press the [START] button on the control panel.

• Repeat the above procedure until the scanning of the last page of the original finishes.

6

When scanning of all pages has finished, press the [FINISHED] button 
on the touch panel.

• Copying starts. The paper exits with its copied side down.
• When the drawer runs out of paper during copying, the corresponding drawer on the touch panel and the [JOB 

STATUS] button on the control panel blink. Add paper to this drawer or select another one with the same paper 
size.

• Be careful because the paper exit area and paper just after exiting are hot.

4

Press the [START] button.

• Copying starts.

When you copy by placing originals on the original glass (e.g. 
using the sort mode, or making 1-sided original 2-sided copies), 
the data of these originals are scanned into the memory. In this 
case, proceed to steps 5 and 6.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments