manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 286 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 286

284

9.BLINKING GRAPHIC SYMBOLS

5.Jam Symbols (Cont.)

9

3

Lower the paper guide and return the automatic duplexer to the origi-
nal position.

• Be sure to close both sides of the automatic duplexer firmly.

Releasing a paper misfeed in the jam releasing cover

3

Return the jam releasing cover, the automatic duplexer and the 
bypass tray to the original positions.

• Returning the automatic duplexer to the original position will close the jam releasing cover.
• Be sure to close both sides of the automatic duplexer firmly.

2

Lift the paper guide as indicated by the 
arrow and remove any misfed paper.

1

Make sure that the bypass tray is 
opened, and then open the automatic 
duplexer.

• When you open the automatic duplexer, the jam releasing cover 

will be opened.

2

Rotate the green knob as indicated by 
the arrow toward the inside and remove 
any misfed paper.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments