manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 202 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 202

200

7.TEMPLATE

7

1. Template

A combination of functions frequently used can be registered as a template and recalled as required. Tem-
plates can be used with the copy, scanning and Fax functions.
•

To use Fax functions, the optional Fax Unit is required.

•

To use scanning functions, the Scanner Kit or the Printer/Scanner Kit (both optional) is required.

The following illustration shows the outline of a template function.

1. Register the combination of the functions to the template.
2. Place the original.
3. Recall the desired template, and then make a copy.

Template in “Useful Template”

In this equipment, 12 templates are included by default. They are registered to be available in the user 
group number 001 “Useful Template”. 
•

To  recall  the  template, see 

 

 P.224 “When recalling a template in a user group”.

HDD

90 %

2004.3.15

2004.3.15

2004.3.15

2004.3.15

3

1

2

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments