Toshiba e-Studio 252 Operator'S Manual Download Page 66

Page: 66 / 362

2.HOW TO MAKE COPIES

1.Setting Originals (Cont.)

Single feed mode

To switch over between the continuous feed mode and the single feed mode, see

P.170 “16.ADF /

SADF”.

If there are more originals, set them in the same way.

• The same operation is performed whether or not you press the [YES] button.

After all originals have finished being fed, press the [FINISHED] but-
ton.

If the [FINISHED] button is not pressed, copying is started when the automatic function clear is operated.

P.32 “Clearing functions selected”

Align the side guides to the original
width.

Insert the original with its face up and
straight along the side guides.

• The original will be pulled in automatically. Be sure to let go of it

when it starts being pulled.

• The menu of step 3 will be displayed.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Search results

Summary of Contents for e-Studio 252

Reviews:

Toshiba e-Studio 252, Operator'S Manual, Page: 66 / 362

Search results

Summary of Contents for e-Studio 252

Reviews: