manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 161 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 161

159

5

8

After the specifying of all insertion pages is finished, press the 
[ENTER] button.

9

Press the [BASIC] button to enter the basic menu, and then select a 
paper source of the same size and direction as the sheet insertion.

• Select other copy modes as required.

10

Press the [START] button.

• When the Reversing Automatic Document Feeder (optional) is used, the original is scanned and copying 

starts.

• When the original is placed on the original glass, perform steps 11 and 12.

11

Place the next original, and press the [START] button.

• Data scanning of this original starts.
• The next original will also be scanned in the same manner when you press the [YES] button on the touch 

panel, and then press the [START] button on the control panel.

• Repeat this step until all the originals have finished being scanned.

12

After all the originals have finished being scanned, press the 
[FINISHED] button.

• Copying starts.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments