manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 49 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 49

47

1

Recommended paper

To make copies with a fine color image, the following types of paper are recommended.
If you wish to use copy paper other than the recommended types, consult your service technician.

*1 Only Toshiba-recommended OHP film should be used. Using any other film may cause a malfunction.

Handling and storing paper

Pay attention to the following points:
•

Avoid using paper that is specially treated or previously printed on another machine, and also avoid 
performing double copying on the same side of the paper, since this may cause a malfunction.

•

Do not use paper with creases, wrinkles or curls, paper prone to curling, smooth or rough paper; this 
may cause paper misfeeds.

•

Paper should be wrapped in its wrapping and stored in a damp-free place.

•

To prevent paper from being folded or bent, store it evenly on a flat surface.

Paper type

Toshiba recommendations/Manufacturer

Mode

Plain paper

TIDAL MP/Hammermill (20 lb. Bond)

PLAIN

Thick

Laser/Hammermill

(24 lb. Bond)

THICK1

(32 lb. Bond)

THICK2

Exact Index/WAUSAU

(90 lb. Index)

THICK2

(110 lb. Index)

THICK3

Tracing paper 

20 lb. Bond tracing paper 

PLAIN

Sticker labels

5165/Avery

THICK3

OHP film 

*1

PP2500L/3M
X-10.0/Folex

TRANSPAR-
ENCY

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments