manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 251 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 251

249

8

Send log

When you press the [SEND] button on the log menu, the sending history of Fax jobs and Internet Fax jobs 
is displayed. (The Fax function and the Internet Fax are both optional.)

The following information is displayed.

4 jobs are displayed in 1 page. Up to 10 pages (40 jobs) can be displayed. When you want to confirm the 
5th and the following jobs, press the [Next] button, and when you want to return to the previous page, 
press the [Prev] button.

The following buttons are displayed.

File No.:

Order of job registered

To:

Recipient’s Fax number or E-mail address of Internet Fax

Date, Time: Date and time the Fax or Internet Fax was sent
Pages:

Number of pages of the Fax or Internet Fax sent

Status:

Result is displayed as “OK” or in error codes.
(For the error codes, see 

 

 P.258 “6.Error Code”.)

[JOURNAL]: Press this button to print the history of sent jobs (= journal). (For details, see 

 

 P.254 

“Printing journals (send/receive log list)”.)

[ENTRY]:

Press this button to register unregistered Fax numbers or E-mail addresses on the send 
log list into the address book. (For details, see 

 

 P.252 “Registering into address book 

from log lists”.)

[RETURN]:

Press this button to return to the log menu.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments