manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 77 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 77

75

2

4

Press the [MEDIA TYPE] button on the touch panel if the media type 
of the paper you have set on the tray is other than plain paper.

5

Press the button of the same media type as the one of the paper you 
have set on the tray, and then press the [ENTER] button on the touch 
panel.

• Set other copy modes as required.
• If a media type which is not same as the one you have set is selected here, this may cause a paper jam or sig-

nificant image trouble.

6

Press the [START] button on the control panel.

When you copy on OHP films, remove the copied OHP films, which have exited on to the receiving tray one by 
one. When the films pile up, they may become curled and may not be projected properly.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments