manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 262 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 262

260

8.JOB STATUS

6.Error Code (Cont.)

8

1C80

Internet Fax transmis-
sion failure when pro-
cessing E-mail job 
received

Confirm the “Received Internet Fax Forward” settings.

1C81

Onramp Gateway 
transmission failure

Confirm the mailbox settings.

1C82

Internet Fax transmis-
sion failure when pro-
cessing Fax job 
received

Confirm the “Received Fax Forward” setting.

1CC0

Job canceling

Job was canceled.

1CC1

Power failure

Check if the power cable is connected properly and it is inserted 
securely. Check if the power voltage is unstable.

3A10-3A12

MIME format error

Ask the sender to resend the E-mail in the MIME1.0 format.

3A20-3A22

E-mail process error

Ask the sender to resend the E-mail.

3A30

Partial E-mail timeout 
error

Ask the sender to resend the E-mail, or change the Partial Wait 
time setting.

3A40

Invalid partial E-mail 
received

Ask the sender to resend the partial E-mail in the RFC2046 for-
mat.

3A50-3A52

HDD full error

Ask the sender to resend the E-mail by separating it to several 
E-mails. If this error occurs because the paper empty occurs 
and too much waiting jobs are stored in the hard disk, add the 
paper to activate other jobs.

3A60-3A62

HDD full alert

Ask the sender to resend the E-mail by separating it to several 
E-mails. If this error occurs because the paper empty occurs 
and too much waiting jobs are stored in the hard disk, add the 
paper to activate other jobs.

3A70

Interrupt partial E-mail 
reception

Ask your administrator to enable the Enable Partial E-mail set-
ting and ask the sender to resend the E-mail.

3A80-3A82

Partial E-mail disabled

Ask your administrator to enable the Enable Partial E-mail set-
ting and ask the sender to resend the E-mail.

3B10-3B12

E-mail format error

Ask your administrator to enable the Enable Partial E-mail set-
ting and ask the sender to resend the E-mail.

3B20-3B22

Context-type error

Ask the sender to resend the E-mail with attached files that are 
the TIFF format.

3B30-3B32

Invalid character set

Ask the sender to resend the E-mail in the ISO-8559-1/2 format.

3B40-3B42

E-mail decode error

Ask the sender to resend the E-mail.

3C10-3C13

TIFF analysis error

Ask the sender to resend the E-mail with attached files that are 
the TIFF format.

3C20-3C22

TIFF compression 
error

Ask the sender to resend the E-mail with attached TIFF files in 
the MH, MR, MMR, or JPEG compression.

3C30-3C32

TIFF resolution error

Ask the sender to resend the E-mail with attached TIFF files 
whose resolution is either 200 x 100, 200 x 200, 200 x 400, 300 
x 300, or 400 x 400 dpi.

3C40-3C42

TIFF paper size error

Ask the sender to resend the E-mail with attached TIFF files 
that can be printed on the paper available for this equipment.

Error code

Problem

What to do

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments