manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 204 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 204

202

7.TEMPLATE

7

2. Registering User Groups and Templates

A template can be registered either in “PUBLIC TEMPLATE GROUP” or “USER GROUP” depending on 
your purpose. Passwords can be set to restrict the unauthorized use of a template.

PUBLIC TEMPLATE GROUP: 

This is prepared as a default setting. Anyone can use a template registered in this group.
It is useful if the setting combinations of functions frequently used throughout the company or organization 
are registered in this group. Up to 60 templates can be registered.
•

When registering a template in the public template group, keying in the Admin Password is required.

USER GROUP:

Up to 200 groups can be registered. It is useful if you register each department, section or person as a 
user group. Up to 60 templates can be registered in each group. Passwords can be set for the user 
groups.
•

“Useful Template” is registered to be available in user group number 001.

Registering a template in the public template group

1

 Set every function you want to include in the combination.

•  e.g.: Setting “Image shift”, “90% reduction” and “10 sets of copies” of the copy function.

3

Press the [REGISTRATION] button on the touch panel.

2

Press the [TEMPLATE] button on the con-
trol panel.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments