Toshiba e-Studio 252 Operator'S Manual Download Page 107

Page: 107 / 362

105

Press the [FRONT STAPLE SORT] (or [DOUBLE STAPLE SORT] or
[REAR STAPLE SORT]) button.

• For the Hanging Finisher (MJ-1022), only the [FRONT STAPLE SORT] button can be selected.
• Set other copy modes as required.

Press the [START] button.

If the paper quantity exceeds the maximum number of sheets that can be stapled, the Finisher automatically
enters the sort mode.

Maximum number of sheets for stapling

•

For the tray loading capacity, see

P.345 “2.Specifications of Options”

•

Two covers of 17 lb. Bond to 110 lb. Index can be added. In this case, the covers are included in the
maximum number of sheets that can be stapled.

Saddle Stitch Finisher (MJ-1024)/Finisher (Type A) (MJ-1023)/Finisher (Type B) (MJ-1101)

*1 Maximum number of sheets for stapling when plain paper and thick 1 are mixed is the same as that of

thick 1.

Hanging Finisher (MJ-1022)

Only plain paper (17 to 20 lb. Bond) can be used.

Paper size

Paper type (weight)

Qty.

Plain paper (17 - 20 lb. Bond)

50 sheets

Thick 1 (21 - 28 lb. Bond)

30 sheets

LD, LG, LT-R, COMP

Plain paper (17 - 20 lb. Bond)

30 sheets

Thick 1 (21 - 28 lb. Bond)

15 sheets

Paper size

Qty.

LT, LT-R

30 sheets

20 sheets

LD, COMP

15 sheets

Summary of Contents for e-Studio 252











































































































































































































































































































































































Search results

Summary of Contents for e-Studio 252

Reviews:

Toshiba e-Studio 252, Operator'S Manual, Page: 107 / 362

Search results

Summary of Contents for e-Studio 252

Reviews: