Toshiba e-Studio 252 Operator'S Manual Download Page 109

Page: 109 / 362

107

Place paper in the drawer(s).

Select the paper size.

• Available copy paper sizes are LD, LT-R and LG.
• For bypass copying, see

P.73 “3.Bypass Copying”.

To use the saddle stitch mode for LD or LG-size paper, lift the stopper of the saddle stitch tray.

Place the original(s).

• When placing originals on the Reversing Automatic Document Feeder, see the illustrations (

P.106) for the

proper page order of the copies.

• When placing originals on the original glass, follow the procedure below.

- When [MAGAZINE SORT] or [MAGAZINE SORT & SADDLE STITCH] is selected: Place the first page of

the originals first.

- When [SADDLE STITCH] is selected: In case of 12-page originals, set them in the order of pages 12-1, 2-

11, 10-3, 4-9, 8-5, then 6-7.

Press the finisher button on the basic menu.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Search results

Summary of Contents for e-Studio 252

Reviews:

Toshiba e-Studio 252, Operator'S Manual, Page: 109 / 362

Search results

Summary of Contents for e-Studio 252

Reviews: