manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 213 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 213

211

7

7

Press the [NAME1] button and the [NAME2] button, and then enter the 
template name.

• [NAME 1] is displayed in the upper side and [NAME 2] is displayed in the lower side of the template button. 

Enter [NAME 1] and/or [NAME 2]. When both are entered, [NAME 1] is displayed in the upper side and [NAME 
2] is displayed in the lower side of the button.

• When the [NAME 1] or [NAME 2] button is pressed, the letter entry menu (

 

 P.33) is displayed. Up to 11 char-

acters can be entered.

• The following symbols cannot be used for [NAME 1] and [NAME 2].

["], [=], [|], [*], [<], [>], [?], [+], [[], []], [;], [:], [/], [\], [,], [.]

8

Press the [USER NAME] button, and then enter the user name of the 
template as required.

• When the [USER NAME] button is pressed, the letter entry menu (

 

 P.33) is displayed. Up to 30 characters 

can be entered.

• To set the password, proceed to step 9. If not, skip to step 11.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments