manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 157 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 157

155

5

4

Press the [EDIT] button to enter the edit menu and then the [COVER 
SHEET] button.

5

Press the desired cover sheet button.

TOP BLANK:

 To add a blank front cover sheet

TOP COPIED:

 To add a copied front cover sheet

BOTH BLANK:

 To add blank front and back cover sheets

TOP COPIED BACK BLANK:

 To add copied front and blank back cover sheets

When “1-Sided Original to 2-Sided Copy” with the [TOP COPIED] or [TOP COPIED BACK BLANK] button 
pressed is performed, a 1-sided copy is made for a cover sheet.

6

Press the [BASIC] button to enter the basic menu, and then select a 
paper source of the same size and direction as the cover sheet.

• Select other copy modes as required.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments