Toshiba e-Studio 252 Operator'S Manual Download Page 63

Page: 63 / 362

Book-type originals

Do not place heavy objects (9 lb. or more) on the original glass and do not press on it with force. Breaking
the glass could injure you.

Raise the original cover or Reversing Automatic Document Feeder
(optional).

Lower the original cover or Reversing Automatic Document Feeder
(optional) carefully.

• Do not lower the Reversing Automatic Document Feeder forcibly when the original is very thick. There will be

no problem in copying even if the Reversing Automatic Document Feeder is not fully lowered.

• Do not look fully at the original glass because intensive light may leak out during copying.

Open the desired page of the original and
place it face down. Align it against the
left rear corner of the glass.

• When you want to use the 2-sided copying function or the dual-

page function on the book-type originals, align the center of the
original on the yellow indicator line of the glass.
(

P.117 “Book-type original -> 2-sided copy”)

(

P.140 “4.DUAL PAGE”)

Summary of Contents for e-Studio 252











































































































































































































































































































































































Search results

Summary of Contents for e-Studio 252

Reviews:

Toshiba e-Studio 252, Operator'S Manual, Page: 63 / 362

Search results

Summary of Contents for e-Studio 252

Reviews: