manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 41 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 41

39

1

6

Press the [ENTER] button.

The menu will switch and the equipment will be ready to be used.

• If the user information is incorrectly entered, the menu will not switch. In this case, press the [FUNCTION 

CLEAR] button and then enter it again.

Displaying the available number of copies

How many copies the user and the department have remaining is displayed, respectively.
The number appears for 5 seconds on the upper right of the screen.
USER:

Available number of copies for the user

DEPARTMENT:

Available number of copies for the department

The available number of copies is displayed only when both the department and user management functions are 
enabled.

• The display differs depending on the management setting of this equipment.

When copying is finished

When you finish all operations, press the [ACCESS] button to prevent unauthorized use of the 
equipment. The display returns to the one for entering user information.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments