manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 30 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 30

28

1.BEFORE USING EQUIPMENT

1.Description of Each Component (Cont.)

1

Adjustment of the angle of the control panel

When adjusting the angle of the control panel

The angle of the control panel is adjustable at any angle between 7 and 45 degrees from the horizontal 
position. 

When changing the angle of the control panel, be careful not to catch your hands in the gap between the 
equipment and the control panel. This could injure you.

When fixing the angle of the control panel

The angle of the control panel can be fixed by using the stopper on the backside of the control panel (at 7 
degrees from the horizontal position). The stopper is located on A when the equipment is set up. Move it 
from the position A to B before fixing it.

A: The position where the angle is adjustable.
B: The position where the angle is fixed.

1

Slide the stopper (in the position A) 
slightly to the right, and then pull it out.

A

B

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments