manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 167 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 167

165

5

4

After “Press START button to copy after changing settings.” appears, 
perform the settings for the 1st job and the common settings for all 
jobs.

• Press the [SETTINGS] button to confirm the settings.
• To change the settings, press the [FUNCTION CLEAR] button, and then start the procedure again from step 1.

5

Press the [START] button.

• The scanning of the originals for the 1st job starts.

6

After “Press START button to copy after changing settings.” appears, 
place the originals of the 2nd job. Perform the settings for the 2nd job.

• Note that copying will be performed in the same modes as those of the 1st job if the settings are not changed.
• Press the [SETTINGS] button to confirm the settings.

7

Press the [START] button.

• The scanning of the originals for the 2nd job starts.
• Repeat steps 6 to 7 until all the originals have finished being scanned.

8

After all the originals have finished being scanned, confirm the num-
ber of copies on the menu and change if needed.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments