manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 82 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 82

80

2.HOW TO MAKE COPIES

3.Bypass Copying (Cont.)

2

Recalling dimensions registered in the memory

Press the desired memory number button from [MEMORY 1] to [MEMORY 4] to recall the dimension 
data registered previously, and then press the [ENTER] button.

• Paper size that can be set is as follows:

Length:

100 mm (3.94") to 297 mm (11.69")

Width:

148 mm (5.83") to 432 mm (17.01")

• To register the dimension data in the memory, see 

 

 P.80 “Registering non-standard size in the memory”.

• Set other copy modes as required.

5

Press the [START] button on the control panel.

Registering non-standard size in the memory

1

Follow steps 1 to 3 on “Bypass copying on non-standard size paper” 
(

 

 P.78).

2

Press the memory number button (from [MEMORY 1] to [MEMORY 4]) 
you want to register the dimension.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments