manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 147 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 147

145

5

6. MAGAZINE SORT

This function allows 1-sided originals to be copied and sorted so that they can be folded and bound along 
a center line like typical magazines or booklets.

Example of copying a 12-page document

•

When placing a portrait originals horizontal to you in the magazine sort mode, be sure to set the correct 
direction of the originals. (

 

 P.167 “14.IMAGE DIRECTION”)

•

The Magazine sort function has 2 procedures; operating from the basic menu and operating from the 
edit menu. When operating from the edit menu, the margin width can be adjusted.
To operate from the basic menu, see 

 

 P.106 “Magazine sort & saddle stitch mode (booklet mode)”.

1

Place paper in the drawer(s).

• When using the Saddle Stitch Finisher, either LD, LG, LT-R, A3, A4-R or B4 is available.

2

Select the paper type.

• For drawer feeding, see 

 

 P.88 “Manual paper selection”.

• For bypass feeding, see 

 

 P.73 “3.Bypass Copying”.

3

Place the original(s).

4

Press the [EDIT] button to enter the edit menu, and then press the 
[MAGAZINE SORT] button.

12

3

2

1

11

2

9

4

7

6

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments