Toshiba e-Studio 252 Operator'S Manual Download Page 111

Page: 111 / 362

109

Hole punch mode (optional)

When the Hole Punch Unit (optional) is installed to the finisher (optional), you can punch holes in the cop-
ies.
•

The available copy paper sizes for this mode are LD, LG, LT, LT-R and COMP.

•

The paper weight applicable for this mode is 17 lb. Bond to 110 lb. Index.

•

Special paper such as OHP films or sticker label cannot be used for hole punching.

Place paper in the drawer(s).

• When using this mode in bypass copying, specify the paper size in advance. (

P.73 “3.Bypass Copying”)

Place the original(s).

Press the finisher button on the basic menu.

Press the [HOLE PUNCH] button.

• Set other copy modes as required.

Press the [START] button.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Search results

Summary of Contents for e-Studio 252

Reviews:

Toshiba e-Studio 252, Operator'S Manual, Page: 111 / 362

Search results

Summary of Contents for e-Studio 252

Reviews: