Toshiba e-Studio 252 Operator'S Manual Download Page 206

Page: 206 / 362

204

7.TEMPLATE

2.Registering User Groups and Templates (Cont.)

Press the blank key, and then press the [SAVE] button.

Press the [NAME1] button and the [NAME2] button, and then enter the
template name.

• [NAME 1] is displayed on the upper side and [NAME 2] is displayed on the lower side of the template button.

Enter [NAME 1] and/or [NAME 2]. When both are entered, [NAME 1] is displayed on the upper side and
[NAME 2] on the lower side of the button.

• When the [NAME 1] or [NAME 2] button is pressed, the letter entry menu (

P.33) is displayed. Up to 11 char-

acters can be entered.

• The following symbols cannot be used for [NAME 1] and [NAME 2].

["], [=], [|], [*], [<], [>], [?], [+], [[], []], [;], [:], [/], [\], [,], [.]

Press the [USER NAME] button, and then enter the user name of the
template as required.

• When the [USER NAME] button is pressed, the letter entry menu (

P.33) is displayed. Up to 30 characters

can be entered.

• To set the password, proceed to step 10. If not, skip to step 12.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Search results

Summary of Contents for e-Studio 252

Reviews:

Toshiba e-Studio 252, Operator'S Manual, Page: 206 / 362

Search results

Summary of Contents for e-Studio 252

Reviews: