manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 51 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 51

49

1

5

While pushing the green lever of the side 
guide in the direction of the arrow, set 
the side guide to the desired paper size.

• Adjust the side guides with both hands.

6

Push the arrow part (left side) to lock the 
side guide.

7

Place paper in the drawer(s).

• Place paper with its copy side up. (The copy side may be 

described on the wrapping paper.)

• For the maximum number of sheets that can be set, see 

 

 P.46 

“Acceptable copy paper”.

• Fan the paper well before placing it in the drawer.
• Be sure that the paper height does not exceed the line indicated 

inside of the guide.

• Do not use creased, folded, wrinkled or damp sheets of paper.

Make sure that a gap of 0.02" (0.04" or less in total) is left between 
the paper and the side guide for plain paper, and approx. 0.02" to 
0.04" (approx. 0.04" to 0.08" in total) for thick paper. If the gap is 
insufficient, it could cause paper misfeeding.

A

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments