manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 25 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 25

23

1

Configuration of options

1.

Original Cover (KA-3511PC)

Holds an original.

2.

Reversing Automatic Document Feeder (MR-3018)

Automatically feeds a placed stack of originals one by one to have them copied.

3.

Offset Tray (MJ-5005)

Enables copied and printed sets to be collated or stacked in groups with each set being offset.

4.

Job Separator (MJ-5004)

Enables Faxes, copies and prints to be output onto separate paper trays.

5.

Large Capacity Feeder (KD-1012)

This feeder enables you to feed up to 2500 sheets (22 lb. Bond) of LT paper.

6.

Paper Feed Pedestal (KD-1011)

Adds one drawer to the equipment. This also enables you to install the Additional Drawer Module (MY-
1021) (optional).

7.

Additional Drawer Module (MY-1021)

This drawer is for adding to the Paper Feed Pedestal (KD-1011). Combined with the 2 drawers in the 
equipment, paper can be fed from 4 drawers in total.

5

6

7

1

3

4

2

10

11

12

13

9

8

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments