manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 46 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 46

44

1.BEFORE USING EQUIPMENT

3.Energy Saving Mode (Cont.)

1

2

Press the [SLEEP] button on the touch panel.

• The equipment enters into the sleep mode. During this mode, the display on the touch panel disappears and 

the [ENERGY SAVER] button lights in green.

To canceling the energy saving mode

Press the [ENERGY SAVER] button on the control panel. The sleep mode is cleared and the equipment 
will be ready for copying.
The sleep mode is also cleared by pressing any button of [COPY], [SCAN], [FAX], [e-FILING] and 
[START].
The [SCAN] is enabled only when the Printer/Scanner Kit or the Scanner Kit (both optional) is installed.
The [FAX] button is enabled only when any of the FAX Unit, Printer/Scanner Kit and Scanner Kit (all 
optional) is installed.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments