manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 146 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 146

144

5.USING THE EDITING FUNCTIONS

5.2IN1 / 4IN1 (Cont.)

5

5

Press the [1 SIDE] (or [2 SIDE]) button.

• Select other copy modes as required.

6

Press the [START] button.

• When the Reversing Automatic Document Feeder (optional) is used, the original is scanned and copying 

starts.

• When the original is placed on the original glass, perform steps 7 and 8.

7

Place the next original, and press the [START] button.

• Data scanning of this original starts.
• The next original will also be scanned in the same manner when you press the [YES] button on the touch 

panel, and then press the [START] button on the control panel.

• Repeat this step until all the originals have finished being scanned.

8

After all the originals have finished being scanned, press the [FIN-
ISHED] button.

• Copying starts.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments