manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 74 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 74

72

2.HOW TO MAKE COPIES

2.Making Copies (Cont.)

2

Interrupt copying in progress and make other copies (Interrupt copying)

While continuous copying is in progress, you can interrupt this job with another copy job.
The following features cannot be used together with interrupt copying:
•

Cover sheet copying

•

Sheet insertion copying

•

Job build

•

Store to e-Filing / Copy & File

•

[e-FILING] / [SCAN] / [FAX] buttons

2

Replace the original with a new one.

• Set other copy modes as required.

3

Press the [START] button on the control panel.

4

After you have finished the interrupt copying, press the [INTERRUPT] 
button again.

• The message “READY to resume job 1” appears and the interrupted job resumes.

Interrupt copying is automatically canceled after a certain period by automatic function clearing without the need 
to press the [INTERRUPT] button again. The interrupted job (= Job 1) resumes after this automatic function 
clearing.

1

Press the [INTERRUPT] button on the 
control panel.

• The [INTERRUPT] button blinks first, then lights after “Job inter-

rupted job 1 saved” appears.

When the [INTERRUPT] button is pressed while originals are 
being scanned, the [INTERRUPT] button blinks first. Then the but-
ton lights after “Job interrupted job 1 saved” appears when the 
scanning is finished.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments