manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 177 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 177

175

6

•

The available settings differ between when the operation is performed from the touch panel of this 
equipment or using “TopAccess” from a client PC. See the e-Filing Guide for details.

•

When the preservation period for documents in e-Filing is specified, the stored documents will be 
deleted after this period has passed. You need to print the documents or download them into a client 
PC using the “File Downloader”. See the e-Filing Guide for details. (For setting the storing period of the 
documents in e-Filing, ask the network administrator.)

•

Be sure to back up the data stored in e-Filing regularly in case of a hard disk failure. See the e-Filing 
Guide for details.

This chapter explains about when copied original data are stored to e-Filing. See the e-Filing Guide for 
storing, printing and managing the document obtained by printing from a PC, scanning, receiving fax 
and receiving Internet Fax (except for copying) and operating e-Filing via network.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments