manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 106 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 106

104

3.SETTING OF BASIC COPY MODES

3.Selecting Finishing Modes (Cont.)

3

Staple sort mode

When the Finisher (optional) is installed, automatic stapling is enabled. You can select the stapling position 
from three types.
•

The paper quantity and weight applicable for this mode differ depending on the Finisher installed in this 
equipment. See 

 

 P.105 “Maximum number of sheets for stapling”.

•

Special paper such as OHP films or sticker label cannot be used for stapling.

•

Only copies of the same width can be stapled. (e.g. LT and LD or LT-R and LG)

(Example of selecting the [FRONT STAPLE SORT] button)

1

Place paper in the drawer(s).

• When using this mode in bypass copying, specify the paper size in advance. (

 

 P.73 “3.Bypass Copying”)

2

Place the original(s).

3

Press the finisher button on the basic menu.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments