Toshiba e-Studio 252 Operator'S Manual Download Page 85

Page: 85 / 362

Change the settings as required.

• The setting of the number of copy sets, page number, time stamp, sort/stapling (when the optional Finisher has

been installed) and hole punch (when the optional Hole Punch Unit has been installed) can be changed.

• If you want to change the setting of the copy density, original mode, zoom or simplex/duplex, press the [MEM-

ORY CLEAR] button to clear the proof copy. After the change, perform the instructions from step 1 again.

Press the [START] button.

• If the number of copy sets is not changed in step 6, one less than the previously specified number is copied.

However, if “1” is specified for the number of copy sets, one set of copies is made.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Search results

Summary of Contents for e-Studio 252

Reviews:

Toshiba e-Studio 252, Operator'S Manual, Page: 85 / 362

Search results

Summary of Contents for e-Studio 252

Reviews: