Toshiba e-Studio 252 Operator'S Manual Download Page 212

Page: 212 / 362

210

7.TEMPLATE

2.Registering User Groups and Templates (Cont.)

Select the desired user group, and then press the [ENTER] button.

• If the desired user group is not displayed, press the [Prev] or [Next] button to switch the menu.

Key in the password (5 digits) for the selected user group, and then
press the [ENTER] button.

• If no password was set when the user group was registered, skip to step 6.

The corresponding buttons of the template registered in the user
group are displayed. Press the blank key, and then press the [SAVE]
button.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Search results

Summary of Contents for e-Studio 252

Reviews:

Toshiba e-Studio 252, Operator'S Manual, Page: 212 / 362

Search results

Summary of Contents for e-Studio 252

Reviews: