manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 138 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 138

136

5.USING THE EDITING FUNCTIONS

5

2. EDGE ERASE

If the original has a dirty or torn edge, it may be reproduced as a black stain on the copy. In that case, set 
the edge erase. A white border is created along the edges of the copy, eliminating those black stains.

•

This function is available only in the case of standard-size originals.

•

The width of the edge erase margin can be adjusted in 1 mm increments.

1

Place paper in the drawer(s).

• When using this mode in bypass copying (

 

 P.73), be sure to specify the paper size.

2

Place the original(s).

3

Press the [EDIT] button to enter the edit menu, and then press the 
[EDGE ERASE] button.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments