Toshiba e-Studio 252 Operator'S Manual Download Page 121

Page: 121 / 362

119

Select LT copy size.

• Only LT size is available. Press the drawer button on the touch panel, or use the paper source selection ( / )

buttons to select LT size.

• If you need a binding space, select the book margin mode. (

P.130 “1.IMAGE SHIFT”)

• Set other copy modes as required.

Press the [START] button. When the data of the opened pages have
been scanned, open the next page and set the booklet on the original
glass again.

• Repeat the procedures above until all the desired pages have been scanned. If the last copy is only a single

page, press the [COPY FINAL PAGE] button on the touch panel before the scanning of this page is started.
The scanned pages will be copied.

Open and place the first page(s) on the
original glass.

• Center the booklet on the yellow indicator line with its bottom

toward you.

Do not place heavy objects (9 lb. or more) on the original glass and
do not press on it with force. Breaking the glass could injure you.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Search results

Summary of Contents for e-Studio 252

Reviews:

Toshiba e-Studio 252, Operator'S Manual, Page: 121 / 362

Search results

Summary of Contents for e-Studio 252

Reviews: