Toshiba e-Studio 252 Operator'S Manual Download Page 7 | Manualshive

Page: 7 / 362

Toshiba e-Studio 252 Operator'S Manual Download Page 7

5

Notice to Users

USE OF RECYCLED PAPER IN THE COPIER

As with all copiers and reproduction devices, the use of the appropriate paper ensures the best image
quality of the copies and the machine’s performance and reliability.
Because of the extreme variances in composition and quality of paper from various manufacturers, con-
sumers should ensure the recycled paper they use is suitable for the copier. In accordance with the EPA
ENERGY STAR Program guidelines, Toshiba recommends the following recycled paper for use in the
copier-

Great White MultiUse 20 paper

If you have any questions regarding the use of recycled paper in your copier, contact your authorized
service technician.

FCC NOTICE

This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to
Part 15 and Part 18 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.

WARNING

Changes or modification made to this equipment, not expressly approved by Toshiba TEC or parties
authorized by Toshiba TEC, could void the user’s authority to operate the equipment.

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

User Safety

This Toshiba Multifunctional Digital Systems does not produce laser radiation hazardous to the user. It is
certified as a Class 1 laser product under the U.S Department of Health and Human Services (DHHS)
Radiation Performance Standard according to the Radiation Control Health and Safety Act of 1968.

Protective housing and external covers completely confine the laser beam light emitted inside the Multi-
functional Digital Systems. The laser beam cannot escape from the machine during any phase of user
operation.

Regulations implemented on August 2, 1976 by the Bureau of Radiological Health (BRH) of the U.S
Food and Drug Administration apply to laser products manufactured from August 1,1976. Laser products
marketed in the United States must comply with these regulations.

Caution

Using controls or adjustments or performing procedures, other than those specified herein may result in
hazardous radiation exposure.

«
...
5
6
7
8
9
...
»

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments