Toshiba e-Studio 252 Operator'S Manual Download Page 338

Page: 338 / 362

336

11.MAINTENANCE

2. Simple Troubleshooting

Check the following items and, if the problem still occurs, call your service representative for assistance.

Equipment does not start

Paper jamming occurs frequently

Item to be checked

Countermeasure

Reference page

Is the power cord plug securely
inserted in the outlet?

Insert the power cord plug until
it comes to a stop.

Is the front cover firmly closed?

Close the cover properly.

P.22 “1.Description of Each

Component”

Item to be checked

Countermeasure

Reference page

Does the message: “Check
paper size setting on control
panel for drawer N (Bypass)”
appear?

Match the size of the paper
placed in the drawer or on the
bypass tray and the one regis-
tered to the equipment.

P.325 “10.“Check paper size

setting on control panel for drawer
N””

Does the paper placed exceed
the line indicated inside of the
side guide?

Remove some of the sheets of
paper and place them with the
paper height not exceeding the
line indicated.

P.48 “Placing paper in the

drawer”

Is the space between the side
guide of the drawer or the
bypass tray and the paper too
narrow/wide?

Keep an appropriate space
between the side guide and
paper, and then place paper
straight along the side guide.

P.48 “Placing paper in the

drawer”

Has all of the jammed paper
removed?

Since the jammed paper may
not be easily found, follow the
guidance shown on the touch
panel.

P.278 “5.Jam Symbols”

Summary of Contents for e-Studio 252











































































































































































































































































































































































Search results

Summary of Contents for e-Studio 252

Reviews:

Toshiba e-Studio 252, Operator'S Manual, Page: 338 / 362

Search results

Summary of Contents for e-Studio 252

Reviews: