manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 29 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 29

27

1

10.

[INTERRUPT] button

Use this button to interrupt the copy job in process and perform another one. The interrupted job is 
resumed by your pressing this button again.

11.

[JOB STATUS] button

Use this button to confirm the job status, printing status, and FAX transmission/reception status of a 
print job, scan job and FAX job. (

 

 P.232 “1.Job Status”)

12.

[ACCESS] button

Use this button when the department code or user information has been set. If this button is pressed 
after copying, the next user cannot use functions such as copying without keying in the department 
code or user information. See the User Functions Guide for the department and user management.

13.

[ENERGY SAVER] button

Use this button when you want to shut down the equipment or when you want the equipment to enter 
into the energy saving mode. When you press this button, the menu for the energy saving mode 
appears. Press the [SLEEP] button on this menu to enter into the energy saving mode and press the 
[SHUTDOWN] button to shut down the equipment.

14.

[FUNCTION CLEAR] button

When this button is pressed, all selected functions are cleared and returned to the default settings. If 
the default setting is changed on the control panel, and copying, scanning, Fax or similar is performed, 
the [FUNCTION CLEAR] button blinks.

15.

[STOP] button

Use this button to stop any scanning and copying operations in progress.

16.

[START] button

Use this button to start copying, scanning and FAX operations.

17.

[CLEAR] button

Use this button to correct numbers keyed in, such as the copy quantity.

18.

ERROR lamp

This lamp lights when an error occurs and the equipment needs some actions to be taken.

19.

[MONITOR/PAUSE] button

Use this button only when a FAX Unit (optional) is installed. (See the Operator’s Manual for Facsimile 
Function for details.)

20.

Digital keys

Use these keys to enter any numbers such as the copy quantity.

21.

Touch panel

Use this panel for the various settings of each function of the copier, scanner and FAX. This panel also 
indicates the status of the equipment, such as when you run out of paper or there is a paper jam.

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments