manualshive.com logo in svg

Toshiba e-Studio 252, Operator'S Manual, Page: 169 / 362

Share
Download
Toshiba e-Studio 252 Operator'S Manual Download Page 169

167

5

14. IMAGE DIRECTION

This function allows you to adjust the direction to ‘open toward the left’ when a portrait original such as LD, 
LT, LG, ST-R, etc., which is placed in a landscape direction, is copied under the mode of “1-Sided Originals 
to 2-Sided Copies”.
•

This function is not necessary for copying in the direction of ‘open to top’.

When a 2-sided ‘open toward the left’ (Book) portrait LD, LT, LG, ST-R original, etc. is copied using this 
function with [2-Sided Originals to 1-Sided Copies], copies can be adjusted to the same direction.

[IMAGE DIRECTION]:

1. Set
2. No setting

1

Place paper in the drawer(s).

2

Place the original(s).

3

Perform the setting of [1 -> 2 DUPLEX] (or [2 -> 1 SPLIT]).

 

 P.112 “4.Duplex Copying”

4

Press the [EDIT] button to enter the edit menu. Then press the [Next] 
button to switch the menu, and press the [IMAGE DIRECTION] button.

• The direction of the copy is adjusted by this operation.

1

2

Summary of Contents for e-Studio 252











































































































































































































































































































































































Reviews:

No comments