SYSCFG Registers
177
SPRUH91D – March 2013 – Revised September 2016
Copyright © 2013–2016, Texas Instruments Incorporated
System Configuration (SYSCFG) Module
Table 10-4. System Configuration Module (SYSCFG) Registers (continued)
Address
Acronym
Register Description
Section
01C1 4174h
CHIPSIG
Chip Signal Register
01C1 4178h
CHIPSIG_CLR
Chip Signal Clear Register
01C1 417Ch
CFGCHIP0
Chip Configuration 0 Register
01C1 4180h
CFGCHIP1
Chip Configuration 1 Register
01C1 4184h
CFGCHIP2
Chip Configuration 2 Register
01C1 4188h
CFGCHIP3
Chip Configuration 3 Register
01C1 418Ch
CFGCHIP4
Chip Configuration 4 Register
10.5.1 Revision Identification Register (REVID)
The revision identification register (REVID) provides the revision information for the SYSCFG module. The
REVID is shown in
and described in
.
Figure 10-1. Revision Identification Register (REVID)
31
0
REV
R-4E84 0102h
LEGEND: R = Read only; -
n
= value after reset
Table 10-5. Revision Identification Register (REVID) Field Descriptions
Bit
Field
Value
Description
31-0
REV
4E84 0102h
Revision ID.
Revision information for the SYSCFG module.
10.5.2 Device Identification Register 0 (DEVIDR0)
The device identification register 0 (DEVIDR0) contains a software readable version of the JTAG ID
device. Software can use this register to determine the version of the device on which it is executing. The
DEVIDR0 is shown in
and described in
.
Figure 10-2. Device Identification Register 0 (DEVIDR0)
31
0
DEVID0
R-0B7D F02Fh
LEGEND: R = Read only; -
n
= value after reset
Table 10-6. Device Identification Register 0 (DEVIDR0) Field Descriptions
Bit
Field
Value
Description
31-0
DEVID0
R-0B7D F02Fh
Device identification.