Subaru 2009 IMPREZA, Service Manual

Page: 998 / 3619

FU(H4DOTC)-73
Fuel Pump
FUEL INJECTION (FUEL SYSTEMS)
26.Fuel Pump
A: REMOVAL
WARNING:
Place “NO OPEN FLAMES” signs near the
working area.
CAUTION:
• Be careful not to spill fuel.
• If the fuel gauge indicates that two thirds or
more of the fuel is remaining, be sure to drain
fuel before starting work to avoid the fuel to
spill.
NOTE:
Fuel pump assembly consists of fuel pump, fuel fil-
ter and fuel level sensor.
1) Release the fuel pressure. <Ref. to
FU(H4DOTC)-60, RELEASING OF FUEL PRES-
SURE, PROCEDURE, Fuel.>
2) Drain fuel. <Ref. to FU(H4DOTC)-60, DRAIN-
ING FUEL (WITH SUBARU SELECT MONITOR),
PROCEDURE, Fuel.>
3) Disconnect the ground cable from battery.
4) Remove the rear seat cushion. <Ref. to SE-11,
REMOVAL, Rear Seat.>
5) Remove the service hole cover.
(1) Remove the screws (A).
(2) Push the grommet (B) down and remove the
service hole cover.
6) Disconnect the connector from fuel pump.
7) Disconnect the quick connectors of fuel delivery
tube (A), fuel return tube (B), and jet pump tube (C).
<Ref. to FU(H4DOTC)-84, REMOVAL, Fuel Deliv-
ery, Return and Evaporation Lines.>
8) Remove the nuts which hold the fuel pump as-
sembly to the fuel tank.
9) Remove the fuel pump assembly from the fuel
tank.
IN-00203
FU-03362
(A)
(A)
(B)
FU-03363
FU-04246
(B)
(C)
(A)
FU-04247