Subaru 2009 IMPREZA, Service Manual

Page: 2586 / 3619

BR-19
Rear Brake Pad
BRAKE
5. Rear Brake Pad
A: REMOVAL
1) Lift up the vehicle, and then remove the rear
wheels.
2) Remove the brake hose bracket.
3) Remove the caliper bolt.
4) Raise the caliper body and support it.
NOTE:
Do not disconnect the brake hose from the caliper
body.
5) Remove the pad.
B: INSTALLATION
1) Apply a thin coat of Molykote M7439 (Part No.
K0770YA000) or grease contained in the pad kit to
the pad clip.
2) Apply a thin coat of Molykote AS880N (Part No.
K0777YA010) or the grease contained in the pad
kit to the contact surface between the pad and
shim.
3) Apply a thin coat of Molykote AS880N (Part No.
K0777YA010) or grease contained in the pad kit to
both surfaces of the pad inner shim.
4) Install the pad to support.
5) Install the caliper body to the support.
Tightening torque:
27 N·m (2.8 kgf-m, 19.9 ft-lb)
6) Install the brake hose bracket.
Tightening torque:
33 N·m (3.4 kgf-m, 24.3 ft-lb)
RS-00264
BR-00660
BR-00032
BR-00599
BR-00602
BR-00601